Lacte Spare Parts for Lacte Breast Pump
a. Valve Membrane – Lacte Duet Breast Pump
Lacte Valve Membrane for Lacte Duet Breast Pump
Compatible with Lacte Valve Body
BPA Free
Authentic spare part
Use The most important spare part in doing the pumping. Made of thin silicon that its use must be careful. If it is torn or scratched it should be replaced to get a smooth pumping performance. It is a part of making sure the air suction is only one way (from the breast to the bottle) and must be used in conjunction with the stand.
Packing: 4pcs / pack
b. Valve Body With Membrane – Lacte Duet Breast Pump
Lacte Membrane With Valve – 1 set
BPA Free
Authentic spare part
Compatible with Lacte Solo / Duet / Duet Elite Breastpump
The most important spare part is doing the pumping. Stand as a connecting device between the funnel membrane.
Is a part of making sure the air suction is only one direction (from the breast to the bottle)
c. Trufit Universal Breast Shield Set | 24mm | 27mm | 30mm
This BPA-free breast shield set includes:
- Flange
- Tubing
- Valve
- Backflow protector
- Bottle
Available with 2 size 24mm / 27mm / 30mm Standard neck
It can be fit: Lacte Duet / Lacte Omnia / Lacte Duet Elite breast pump.
d. Soft Breast Shield Expression Collection Kit – 1 Set
Lacte hard breast shield expression collection kit
Bottles not included ( Wide Neck Bottle )
- 1x Lacte Main body
- 1x Lacte Cap with plug
- 1x Lacte valve head with membrane
- 27mm – available in one size only
Suitable for any model Lacte Breast pump
Packing: 1 set
e. Silicone Valve For Handsfree Silicone Cup
Silicone Valve
The most important spare part is doing the pumping.
If the valve is torn then the pump suction will be reduced drastically or even completely absent.
After 6 months it must be replaced to maintain pumping performance from its elasticity level. Because the valve is made of silicone material.
Packing : 1pc / Pack
f. Silicone Tubing With Connector
Lacte Duet silicon tube complete with connector – 1 SET
Tubing cleaning instructions:
– Wipe the outside of the tubing with a clean, damp cloth.
Avoid getting water or fluids inside the tubing.
– If liquids are found inside the tubing, rinse the tubing with clean hot water. Hang to AIR DRY COMPLETELY BEFORE USING.
– DO NOT insert any object into the tubing.
g. Silicone Breast Shield – 1pc
The physical dimension or the breast shield funnel opening is 27mm diameter.
However, due to the design and the nature of our soft & smooth silicone breast shield, it is flexible to emulate from 24mm (deeper side) and comparable up to a 27mm traditional hard plastic breast shield.
Use Parts attached fed to funnel.
h. Diaphragm For Handsfree Silicone Cup
Made of silicone which must be replaced every 6 months to stabilize the pumping performance.
If the diaphragm is damaged (torn or leaking) then there is no suction.
The level of elasticity affects pumping performance
Packing: 1pc / Pack
i. Diaphragm
Diaphragm to be placed into main breast shield body and follow by the cap onto it. Can fit breast pump Lacte Duet Electric/ Lacte Duet Elite / Lacte Solo
Use Suction-producing component parts on the breast pump. This section is located under the cap/lid of the diaphragm, placed at the top of the funnel. If the diaphragm is damaged (torn or leaking) then there is no suction. Made of silicone which must be replaced every 6 months to stabilize the pumping performance. The level of elasticity affects pumping performance.
j. Breast Shield Frame – New
Lacte breast shield frame for soft silicone breast shield ( New )
k. AC Power Adaptor For Lacte SOLO
Lacte Solo AC power adaptor,
DC 6V 2A (1pc)
Packing: 1 pc
Warranty: 6 Months
l. AC Power Adaptor For Lacte DUET
Lacte Duet AC power adaptor,
DC 6V 2A (1pc)
Packing: 1 pc
Warranty: 6 Months
m. 2nd Gen Soft Breast Shield Expression Collection Kit
Soft Breast shield Kit without bottle set
Silicone shield size 25MM
Suitable for all Lacte Breast pump
n. 2nd Gen Silicone Breast Shield | 21mm | 25mm | 29mm
Silicone Breast shield for Lacte Duet Omnia
Selection of size : 21mm, 25mm & 29mm
*Standard size included in breast pump set is 25mm, if need a different size please purchase another size 21mm or 29mm*
Massager (Silicone Pads) which integrates with the valve. Can reduce breast milk tucked into the funnel.
Use
Parts attached to the funnel. Serves to reduce pain when pumping.
Packing : 1pc / Pack
o. 2nd Gen Diaphragm
Lacte Duet Omnia Breast pump Diaphragm Parts provide comprehensive protection against milk back up into the pump and tubing while pumping. It is critical to have this hygienic barrier.
On the breast pump, use suction-producing component elements. This part is located at the top of the funnel, beneath the diaphragm’s cap/lid. There is no suction if the diaphragm is broken (ripped or leaking). To keep the pumping performance stable, it’s made of silicone and needs to be changed every 6 months. Pumping performance is influenced by elasticity.
Packing : 1pc / Pack
p. 2nd Gen Cap
Spare part for Breast shield main body for Lacte Duet Omnia
Use
To close the diaphragm to work properly, the channel on the Cap will be joined by the connector on the hose and connected to the machine for pumping. An important part of breastfeeding.
Packing : 1pc / Pack
q. 2nd Gen Breast Shield Body
Spare part for Breast shield set for Lacte Duet Omnia
Use
The main spare part is the conduit for breast milk to the bottle
The container works the diaphragm and membrane
The size of the funnel is 27mm from the nipple measurement.
Packing : 1pc / Pack
r. Diaphragm – Lacte Nova Breast Pump | 1pc
Diaphragm replacement part for Lacte Nova Breast Pump. This is usually needed to replace when the suction of the pump is low or no suctions. It is usually recommended to change often for the performance of the breast pump. Come in 1 pc.
s. Silicone Funnel 24mm | 28mm – Lacte Nova Breast Pump
BPA-Free Funnel (Breast Shield)
– Available in sizes 24mm / 28mm
Reviews
There are no reviews yet.